Product Categories
contact us

  • Contact: 15822855000


    400 1898 959


  • Company Address: Tsing Hua University Park Headquarters, Beichen District, Tianjin

Safety Essentials for Handling Lithium Battery Fire Accidents in Production and Storage Use Sites (2)

The main points of safety in handling lithium battery fire accidents in production and storage use sites, then the editor will give you an introduction to the previous one:

Article 4. Position setting

(1) Use terrain, features and load-bearing components to set up water gun positions.

(2) When using the ladder setting position on windows and balconies, the upper end of the ladder must be higher than the windows and balconies by more than 2 levels, and fixing measures should be taken as far as possible.

(3) Give full play to the role of security guards and guards. When setting up locations at the fire site of the building, they should be connected to each other and an evacuation signal should be issued in time in an emergency.

(4) When transferring positions or adjusting combat forces, the coordination and unity of the entire combat deployment must be considered to prevent the entire combat operations from being affected by the adjustment of local forces. Every time you transfer positions or adjust combat troops, you must immediately count personnel and do a good job of protection.

Article 5 Fire attack

(1) Before a fire occurs, cut off the power supply of the burning building and make preparations to prevent electric shock.

(2) When a fire occurs during the process of lithium battery filling, dry powder, carbon dioxide, foam, water and other extinguishing agents can be used according to Class A fire extinguishing methods.

(3) When a fire occurs during the lithium battery filling process, dry powder, carbon dioxide, foam and other extinguishing agents can be used according to the Type B fire extinguishing method.

(4) When a fire occurs in the lithium battery molding process, storage and use place, a large amount of water can be used for cooling according to the Class C fire extinguishing method to prevent explosion accidents.

(5) When internal fire extinguishing, the correct attack route and method should be selected, and the load-bearing wall under the cover of the water gun should be used to enter the fire scene.

(6) When setting the position of the water gun, keep a distance of more than 10 meters from the ignition point and rely on load-bearing walls and solid components as a cover. It is strictly forbidden to install water guns around non-load-bearing walls such as brick walls and shelves, as well as under ceilings and floors with heavy objects, to prevent sudden injuries such as collapse and fall.

Related Industry Knowledge